The material sample is cut out of a regularly manufactured plate. It shows the original properties that can be expected from the product. However, it should be noted that it's a factory-fresh product and some properties are fully distinct after multiple days or weeks of use. This can be accelerated by washing it in the dishwasher.
Thanks to the material sample you can test the properties that are relevant for the planned use. Put it into the freezer box filled with water and check in the freezer if it's really frost-resistant. Hit it with a hammer and look and listen how stable, elastic and damping it is. Test the sample haptically and optically. However, please note that the typical distance during the observation is about 150 cm. Convince yourself how fast the potential new-smell vanishes. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.
Colour
Discount:
- €20.00 / 25 piece / set/25
- (0.22 kg / piece)
-
Realisation time approx.
1-3 days
Properties
Colour
material The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.
Connecting system There is a strong mounting system consisting in an overlap and a dovetail joint formed into the edges of every tile. Thus, a form-fit, permanently loadable connection is created between the plates while laying. However, the zip is not visible in the surface. This type of tiles unites the best possible connection system for rubber granulate tiles with a classic, rectangular seam design of a chequerboard.
Structure of the underside
