Shop
Wall protection - skirting board von WARCO im Farbdesign Slate grey mit den Abmessungen 750 x 80 x 20 mm. Produktfoto von Artikel 2266 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 2266, Wall protection - skirting board, Format 750 x 80 x 20 mm, Farbe Slate grey.
Großaufnahme vom Verbindungssystem von WARCO-Boden 2266 - Wall protection - skirting board im Farbdesign Slate grey. Abmessungen 750 x 80 x 20 mm.
Typische Verlegung oder Einbausituation für den Artikel 2266 von WARCO - Wall protection - skirting board, Farbton Slate grey in der Abmessung 750 x 80 x 20 mm.
Wall protection - skirting board von WARCO im Farbdesign Slate grey mit den Abmessungen 750 x 80 x 20 mm. Produktfoto von Artikel 2266 in der Aufsicht von schräg vorne.
Wall protection - skirting board von WARCO im Farbdesign Slate grey mit den Abmessungen 750 x 80 x 20 mm. Produktfoto von Artikel 2266 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 2266, Wall protection - skirting board, Format 750 x 80 x 20 mm, Farbe Slate grey.
Großaufnahme vom Verbindungssystem von WARCO-Boden 2266 - Wall protection - skirting board im Farbdesign Slate grey. Abmessungen 750 x 80 x 20 mm.
Typische Verlegung oder Einbausituation für den Artikel 2266 von WARCO - Wall protection - skirting board, Farbton Slate grey in der Abmessung 750 x 80 x 20 mm.
Wall protection - skirting board von WARCO im Farbdesign Slate grey mit den Abmessungen 750 x 80 x 20 mm. Produktfoto von Artikel 2266 in der Aufsicht von schräg vorne.

Wall protection - skirting board RL "Slate grey"

EAN: 4251469322677 | Item no.: 2266

The versatile wall protecting - skirting board made of rubber granulate is not only a smart decorative strip with a radiused visible edge, but above all a robust, impact-resistant and damping protective strip for walls and furnishings.

Pasted as a skirting board at the floor level, the baseboard is a harmonic completion for the rubber granulate tiles laid on the floor. The skirting board covers the unaesthetic cutting edges and protects the wall from getting dirty during floor cleaning.

It can be stuck horizontally or vertically at the appropriate height and act as wall, ram or corner protection. The strip protects the walls, furnishings or transport trolleys against repulsion and dirt, damps every bump and prevents noise.

Colour
Dimensions
750 x 80 x 20 mm
Type or design
RL (Stepped rebate joint - round top front edge)
  • €7.87 / 1.33 piece / lm

  • Plus delivery costs

    (0.95 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour Slate grey During the production of slate grey products, the black rubber granulate (SBR) obtained from car tyres is mixed with a slate grey coloured binder and then pressed in a form. The black rubber particles are superficially covered with grey. Slate grey is a neutral, dark grey colour hue that fits well into modern and neutral environments.

material The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly The rubber bar has an even bottom side that can be pasted on the base course. The sticking on can be done on the whole surface or at some points - depending on the kind of base course. For this purpose, the permanently elastic WARCO PU glue is applied. The bar edges are formed as overlaps - they interlock while mounting and make a seamless, continuous pattern.

Structure of the underside

The element has a homogenous cross section. The bottom side is even, without any formed structure or draining channels. It's mounted on an even, bound base course. Small cracks in the base course are overridden. The element can partially adjust itself to unevenness. Please take note of the laying instruction.

Characteristics

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Just paste it on

Paste on an appropriate base course with WARCO PU glue at some points or on entire surface.

Well and favourable invested money

Safe investment due to the original WARCO product with warranty - proved thousands of times.

Weatherproof - in the open air and in buildings

For applications in the open air and under roof. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Damping of vibrations, structure-borne and impact sound

Damping of vibrations, structure-borne and impact sound

The higher the indicated value, the better the damping of vibrations, structure-borne and impact sound. It causes a better acoustic and mechanic decoupling between the activities on the material and the ground on that the material is laid. While choosing the material, the material parameters compressive strength, elasticity and shock absorption should be always selected according to the planned application, in order to obtain the best long-term results.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.