Shop
Stair covering von WARCO im Farbdesign Light green spotted mit den Abmessungen 485 x 485 x 8 mm. Produktfoto von Artikel 0905 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 0905, Stair covering, Format 485 x 485 x 8 mm, Farbe Light green spotted.
Großaufnahme vom Verbindungssystem von WARCO-Boden 0905 - Stair covering im Farbdesign Light green spotted. Abmessungen 485 x 485 x 8 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0905 - Stair covering im Format 485 x 485 x 8 mm.
Typische Verlegung oder Einbausituation für den Artikel 0905 von WARCO - Stair covering, Farbton Light green spotted in der Abmessung 485 x 485 x 8 mm.
Stair covering von WARCO im Farbdesign Light green spotted mit den Abmessungen 485 x 485 x 8 mm. Produktfoto von Artikel 0905 in der Aufsicht von schräg vorne.
Detailaufnahme der Randausprägung von WARCO-Produkt 0905, Stair covering, Format 485 x 485 x 8 mm, Farbe Light green spotted.
Großaufnahme vom Verbindungssystem von WARCO-Boden 0905 - Stair covering im Farbdesign Light green spotted. Abmessungen 485 x 485 x 8 mm.
Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0905 - Stair covering im Format 485 x 485 x 8 mm.
Typische Verlegung oder Einbausituation für den Artikel 0905 von WARCO - Stair covering, Farbton Light green spotted in der Abmessung 485 x 485 x 8 mm.

Stair covering GZ "Light green spotted"

EAN: 4251469309050 | Item no.: 0905

Unaesthetic or unsafe stairs not being exposed to the weather can be attractively and safely designed with an impact-elastic stair covering made of rubber granulate. The slip-resistant, anti-skid stair covering prevents slip accidents and provides a safe stepping.

The stair covering is made of precisely cut, handy tiles with a zipper toothing that becomes nearly invisible after the mounting. That's how the stairs of every size can be covered for a reasonable price, with minimum waste. The cuts are easily pasted on the step with a permanently elastic glue. This product has been manufactured with in a high-concentrated design. Thus, it's particularly resistant against abrasion and mechanical loading, low or not water-permeable and has a homogenous surface.

Colour
Size
485 x 485 x 8 mm 970 x 970 x 8 mm 485 x 485 x 16 mm 970 x 970 x 16 mm
Connecting system
CZ (Tile with cut out zip) GZ (Tile with cut out zip) EZ (Tile with cut out zip) TZ (Tile with formed zip) HZ (Tile with hidden zip)
  • €40.00 / 4.26 piece / m²

  • Plus delivery costs

    (1.70 kg /  piece)

  • Realisation time approx.

    7-14 days
piece

Properties

Colour

Light green spotted In the colour design Light green spotted, the black rubber granulate gained from car tyres (SBR) is mixed with a new, green imbued EPDM granulate. The share of the green EPDM granulate is about 10%. The irregularly formed green granules of different size ease the black as basic colour.

material A very fine black granulate with an edge length of up to 0.5 mm creates especially even surfaces.The granulate originates from discarded tyres - it's natural rubber (NR) and Styrene-Butadiene Rubber (SBR). In order to ease the black colour of tyre rubber, 10% of new, fully colourful EPDM is admixed.

Connecting system Every tile is cut out of a larger format with the highest precision. So the zip toothed strip arises that makes a form-fit connection between the adjacent plates while laying. They build a seamless, connected, positionally stable tile carpet of high durability and loadability. Since the plates' edges are sharply cut, the single tiles in the surface are hardly visible in case of the same colour design.

Structure of the underside

The tile has a homogenous cross section. The bottom side is even, without any formed structure, identically to the top side. It's mounted on an even, bound base course (concrete, screed, asphalt, parquet, etc.). The tile can partially adjust itself to unevenness. Please take note of the laying instruction.

Characteristics

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Quickly and simply laid

Easy mounting without special expert knowledge on bound of fixed base courses.

Well and favourable invested money

Safe investment due to the original WARCO product with 5 years warranty - proved thousands of times.

For roofed areas

Application on weatherproof areas and for use in buildings.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Comparative values

Compressive point-load strength

Compressive point-load strength

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances. In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Elasticity and shock absorption

Elasticity and shock absorption

The higher the indicated value, the more elastic the material and the better it absorbs the shocks (falling objects, steps and kicks, drops). This means also that the material is softer and more flexible and e.g. it leads to a worse ball bounce or worse suitability for vehicle traffic. In special application cases it should be tested by an easy trial with a material sample, if the kinetic energy exerted by the typical object (mass and velocity) is cushioned as requested. If the material is too weak, it will be overloaded, a material with too high stiffness will not give the desired absorption.

Closeness and fine structure of the surface

Closeness and fine structure of the surface

The higher the indicated value, the smoother and more homogenous the material surface. The lower the value, the rougher the surface, the more noticeable the single rubber particles of the material, the more open-pored the surface. The structure of the surface normally affects the water-permeability and slip-resistance, as well as the cleaning-friendliness. The haptic perception of the material reaches from grainy-granular and grippy-rough to smooth or velour-like. Generally, the material surface is always plain and without any unevenness. The exception are the panels with anti-skid elements formed on the surface.

Resistance against abrasion of particles

Resistance against abrasion of particles

The higher the indicated value, the more resistant the material structure against rubbing down of single particles caused by grinding or scrubbing moves. Intensively grinding or scrubbing moves are caused e.g. by car tyres if steered while standing or by dragging heavy furniture over the surface, but also by intensive fitness workouts. However, also on intensively used surfaces, e.g. public places, footpaths or beer gardens the higher abrasive loading of the material can be assumed.

Liquid-permeability and open-pore nature

Liquid-permeability and open-pore nature

The higher the indicated value, the faster the liquids (e.g. water) run through the material and the higher is the amount of liquid able to pass the material in a given time period. The value applies for clean material. In case of clogged pores, e.g. ill-kempt stall mats in a horsebox, the flow is obstructed or impossible. Good liquid-permeability is important in the outdoor areas, because it prevents puddle formation and soil sealing. Indoors a close-pored material doesn't let the washing water or spilled drinks penetrate into it.

Skid resistance in the wet and dry state

Skid resistance in the wet and dry state

The higher the indicated value, the higher the level of skid resistance of the material surface in the wet or dry state.

Heat insulation and insulation against ground cold

Heat insulation and insulation against ground cold

The higher the indicated value, the better the insulation of the material against heat and coldness. The material is not a replacement for heat insulating materials, but it significantly improves the comfort feeling. In a gym, but also in a balcony or terrace the material insulated against the ground cold; the botty will not get cold. There is a similar effect in the stall mats in the horse keeping or dog kennel mats. In the winter, the workplace mats assure dry and not so cold feet is sales booths.

Frost resistance and suitability for permanent wetting

Frost resistance and suitability for permanent wetting

The higher the indicated value, the more suitable the material for usage in areas, where a permanent wetting (e.g. rainy weather periods or application in wet rooms) or frosty periods can occur. The rubber can swell up when permanently drenched; the material can expand up to 2%. The drenching can be avoided by a good draining in the material (liquid-permeability) and under the material (draining bottom side).

Wear resistance of the colour design

Wear resistance of the colour design

The higher the indicated value, the more durable and stable the colour design. The value is explicitly related to the usage-dependent stability of the colour design (wear resistance e.g. against scouring or stamping), but not for separately estimated, possible colour changes caused by the UV radiation (sunlight). As a general rule, the materials made of imbued rubber (coloured though and through like a minced jellybaby) have a significantly higher colour fastness than the materials where the (normally black) rubber is processed with a coloured binder and have only a coloured coating.

Lade Produktbewertungen

Matching accessories

Versandregion wählen
Zur Berechnung der Versandkosten wäre es hilfreich, wenn Sie uns jetzt schon das Land nennen könnten, in welches geliefert werden soll.