Bumper Plate BP "Anthracite"
- /
-
Ready to ship
from stock in 1-3 days - (20.00 kg / Piece)
EAN: 4251469360877 | Item no.: 6087
Bumper Plate is pressed from fine rubber granules bonded with polyurethane and has a steel ring in its bore. When dropped from head height, it absorbs most of the impact energy, rebounds in a controlled way and then comes to rest. All weights have the same diameter. The barbell therefore always sits at the same starting height and lands evenly across all the loaded plates when dropped.
What training is the Bumper Plate suitable for?
Bumper Plate is designed for exercises where a barbell is lowered or dropped from a height. These include the snatch and the clean and jerk in weightlifting, cleans and thrusters in CrossFit, and deadlifts and squats. The plate fits Olympic barbells with 50-mm sleeves. It can be used in a gym, a CrossFit box or a home gym. Its UV-stabilised granules also make it suitable for outdoor training.
How does the Bumper Plate absorb impact?
Bumper Plate absorbs impact through its elastic rubber body. The rubber yields slightly when it hits the ground and slows the barbell down. Part of the energy is converted into heat. The rest produces the controlled rebound. An iron weight plate transfers the impact to the floor and the building structure with almost no damping. The Bumper Plate significantly reduces the peak impact force and makes dropping the barbell noticeably quieter.
Why do all weights have the same diameter?
Bumper Plate has the same outside diameter in every weight class. Only its width increases as the weight increases. The barbell therefore always sits at the same starting height, regardless of which plates are loaded. When dropped, the barbell lands evenly and the impact is spread across all the loaded plates. This helps protect the plates, the barbell and the floor.
What is the Bumper Plate made from?
Bumper Plate is made from fine recycled tyre rubber granules (ELT), produced from end-of-life tyres and bonded with polyurethane. The plate is pressed in a mould under high pressure. The rubber body has a consistent structure and absorbs impact evenly throughout its cross-section. A steel ring sits in the bore. It keeps the plate correctly seated on the sleeve and protects the bore from wear. The finely textured, closed surface is highly abrasion-resistant. The material complies with the limits for harmful substances that apply in the EU. New plates may initially have a rubber smell. The smell fades after a short time.
What flooring should be used under the Bumper Plate?
Bumper Plate helps protect the floor, but a suitable flooring system is still needed where heavy barbells are dropped regularly. This can be a training floor with Base Layer Class 1 panels beneath it. This type of floor absorbs more of the impact and reduces the load on the screed and the floor structure.
Discount
Product Highlights
Characteristics
Product Details – Material and Structure
Comparative values
Equipment for a home gym includes a slip-resistant fitness surface, suitable training equipment, storage and sufficient movement space for exercises.
A slip-resistant fitness surface is best planned in from the outset. A fitness surface made from PU-bound rubber granules reduces noise and vibration and protects the substrate. Thinner tiles are often sufficient for cardiovascular equipment, while thicker slabs are selected for floor exercises, free-weight areas and heavy equipment.
To get started, include equipment for pushing, pulling, leg and core exercises. Basic equipment includes dumbbells or kettlebells, resistance bands and a pull-up bar. An adjustable weight bench and an exercise mat complete the set-up.
For squats, bench presses and deadlifts, add a barbell, weight plates and a rack with safety supports. The rack and pull-up bar should only be fixed to load-bearing structures. Cardiovascular equipment can supplement endurance training, but it is not essential.
Stable storage and sufficient movement space remain important.
A home gym needs a specialist gym floor covering designed for point loads and dynamic loads from training equipment, free weights, jumps and other movement-intensive exercises.
For these loads, a gym floor covering made from PU-bound rubber granules is slip-resistant, protects the substrate, absorbs part of the impact energy and reduces impacts and vibrations.
For effective basic cushioning, the gym floor covering should be at least 10 mm thick. The greater the equipment weight, impact load or potential drop height of weights, the higher-performing the gym floor covering must be. Damping cannot be determined from covering thickness alone: the relevant factors are the performance values of the specific gym floor covering, such as force reduction and impact sound reduction. Density and granule fraction are particularly significant for these performance values.
Where weights are dropped, the gym floor covering must be matched to their weight and drop height. Construction protection mats and comparable makeshift measures are not designed for use as gym floor coverings.
The cost of setting up a home gym, also known as a home fitness room, ranges from around €500 to €15,000 (about £425 to £13,000), depending on the fitness equipment, room size and fit-out.
Fitness equipment is usually the main cost driver, while room size and the extent of the fit-out also affect the budget.
A basic set-up with dumbbells, a weight bench and a pull-up bar costs considerably less than a training area with a rack, cable machine or cardio equipment. Delivery and installation costs often need to be added.
Second-hand fitness equipment can reduce initial purchase costs, provided that its condition, operation and transport are checked before purchase.
The flooring must also be included in the calculation. Slip-resistant fitness flooring made from PU-bound rubber granules dampens noise and vibrations and protects the substrate.
Flooring costs depend on the size of the training area, the thickness of the tiles and the preparation of the substrate. With suitable tile systems, the area can be extended later.