Shop

Rubber patio tile Classic FP "Anthracite"

€13.60 / Piece
  • plus shipping costs

    /
  • Ready to ship

    from stock in 1-3 days
  • €54.40 / 4 Piece / m²
  • (5.32 kg /  Piece)

EAN: 4251469361782 | Item no.: 6178

Rubber patio tile Classic is a water-permeable tile designed for balconies, terraces, roof terraces and loggias. Manufactured from medium-grain rubber granulate derived from recycled end-of-life tyres (ELT), the tiles form a resilient, open-pored surface that manages rainwater effectively while providing a firm and comfortable walking area.

Composition and surface

The tile consists of PU-bound ELT granulate with a medium grain structure. In coloured versions, a pigmented binder coats the black granules in the upper layer, creating the visible finish. The textured surface offers secure footing, including in wet conditions, while maintaining a consistent appearance across the laid area.

Drainage

An open-pored structure allows rainwater to pass directly through the tile. On bonded bases such as concrete or screed, integrated drainage channels on the underside guide water along the existing fall. When installed over plastic gravel grids, water percolates through and disperses into the sub-base, supporting effective drainage without ponding.

Laying and connection

Tiles are laid loose in a staggered (half-bond) pattern and connected using plastic connectors inserted into pre-drilled holes on the side faces. Each tile links to four neighbouring tiles, creating a stable surface. A surrounding edge restraint prevents lateral movement. Alternatively, the connectors can be secured using a permanently elastic PU adhesive where required.

Use, maintenance and durability

The elastic surface reduces footfall noise and rolling sound, contributing to a quieter outdoor area. The tiles are frost-resistant and weather-resistant, suitable for year-round use on residential terraces and balconies. Individual tiles can be lifted and replaced without disturbing the surrounding area, which simplifies repairs after local damage. Routine care is straightforward, typically limited to occasional sweeping or hosing down to remove debris.

Product type FP (plastic connectors to plug in or glue | slightly bevelled edges | underside with drainage structure)
Price and discount
0 m²

Product Highlights

Characteristics

UV-stabilised

ELT granules are UV-stabilised. Some coating shades may change slightly outdoors.

Harmful substance limits met

Meets EU limits for harmful substances. Initial rubber odour diminishes.

Indoor and outdoor use

Frost-resistant, suitable for indoor and outdoor use.

Efl

Normally flammable.

Product Details – Material and Structure

Comparative values

How do patio tiles made from rubber granules age?

Patio tiles made from PU-bound rubber granules change over time in colour and surface appearance, while their elastic properties change more slowly. The extent of these changes depends on the type of granules, sunlight at the installation site and the use of the area. Patio tiles pass through a bedding-in phase during the first few weeks. With coloured recycled tyre rubber granules (ELT), the pigmented PU binder initially becomes slightly darker in sunlight; because individual patio tiles receive differing amounts of light, the surface can temporarily appear uneven. A freshly cut EPDM wearing layer may take on a slightly warmer tone during its first days in sunlight.

In sunlight, a patio tile may temporarily become darker because of the PU binder rather than the EPDM rubber granules. This change is reversible: the colour subsequently becomes lighter again and the appearance will generally even out. With UV-stabilised tiles, UV radiation affects the tile more slowly; this does not refer to colour shade and is not a promise that the colour will remain unchanged.

Over the longer term, the colour appearance changes for different reasons depending on the type of granules. Natural black ELT rubber granules are deep black when new, gradually developing an anthracite tone under UV exposure, similar to the colour change seen in car tyres. In coloured ELT, the PU binder is pigmented and forms a coloured coating around the black rubber granules. The colour is held in this coating rather than in the granules themselves, so use on walked-on areas can abrade the coating and reveal the black rubber granules beneath. An EPDM wearing layer is coloured throughout, colour-stable and UV-resistant.

Deposits can also alter the appearance. Dust, pollen and fine sand can settle in the surface structure, making the area appear duller; these residues can be removed, while the slip-resistant properties remain. This should be distinguished from the long-term behaviour of pure ELT under sustained intense sunlight: it slowly loses elasticity and becomes more brittle near the surface, a process that develops more slowly than visible colour changes.

Are rubber patio tiles classified as R10?

Patio tiles made from rubber granules achieve slip resistance class R10 under BS EN 16165. The test uses standard test footwear on an oil-wetted ramp, in accordance with Annex B of BS EN 16165 (formerly DIN 51130). Depending on the product range, the mean overall acceptance angle lies between 12 and 17 degrees, so every range achieves R10. The tiles are described as slip-resistant rather than slip-proof because the classification applies only to the conditions tested.

Most of this slip resistance comes from hysteresis friction: the sole of the shoe deforms as it moulds around the individual rubber granules, and it is that deformation that generates most of the friction. Outdoors in rain, the permeable surface also helps, as rainwater drains through the tiles and a continuous film of water does not normally build up. The oil ramp test does not capture this effect.

The tiles have not been rated for barefoot areas under Annex A of BS EN 16165 (classes A, B or C), so no slip resistance rating can be given for barefoot use. Wet leaves, algae, ice, frost, compacted snow, oil, grease and cleaning residues can reduce slip resistance or remove it altogether. Keep the surface clear, sweep it and remove any oil promptly. Slip resistance may also decline over the service life, as abrasion can gradually smooth the surface of the granules.

How much do rubber patio tiles weigh per square metre?

Rubber patio tiles in the Classic version, measuring 50 × 50 × 3 cm, weigh around 21 to 22 kg per square metre; a single tile weighs 5.32 to 5.42 kg. Four tiles of this size cover one square metre, so the weight per square metre is four times the weight of one tile.

The weight rises with tile thickness, as the safety tiles of the same FP range in the same size show. The 4 cm tile weighs 6.15 kg, which is around 25 kg per square metre, and the 4.8 cm tile weighs 6.67 kg, around 27 kg per square metre. For tiles made from rubber granules bonded with polyurethane, the FP range in this size therefore gives a guide figure of around 21 to 27 kg per square metre for thicknesses of 3 to 4.8 cm.

For a roof terrace or a balcony, this weight per square metre is the figure used to include the load of the surfacing in the design. Within the range, it depends on the tile thickness chosen.

How hot can rubber tiles become in the sun?

Rubber granule surfacing can heat up substantially in direct sunlight. Its surface temperature depends on colour, the duration and intensity of exposure, and conditions such as air temperature, wind and shading.

In unfavourable summer conditions, an unshaded black rubber surface can reach more than 60 °C. As heatwaves become more frequent as a result of climate change, this aspect is gaining importance. When the air temperature in the shade is already 40 °C or above, no outdoor surface covering should be expected to have a cooler surface after several hours of direct sunlight.

Dark surfaces absorb more solar radiation and usually heat up more than light or flecked options. Colour selection and shading should therefore be considered early for patio tiles used barefoot, surfaces around pool edges and impact-absorbing tiles.

A shade sail, awning or natural shade limits further heat gain and helps the surface to cool. How quickly the surface cools depends on wind, air temperature and the amount of heat absorbed beforehand. In intense sunlight, check that the surface is comfortable to walk on before going barefoot or playing.

How thick are patio tiles?

How thick patio tiles are depends on the type of covering, the installation method and how the area will be used. Typical thicknesses vary considerably between patio coverings.

Ceramic patio tiles are usually around 0.8–1.2 cm thick and are fully bonded to the substrate. Ceramic slabs laid on pedestals without adhesive are generally around 2 cm thick.

Natural stone slabs are commonly 3–5 cm thick, depending on the type of stone and the slab format. Concrete patio slabs are typically 4–6 cm thick, with larger formats sometimes requiring greater thickness.

Timber and WPC decking boards are generally around 2–3 cm thick and are fixed to a supporting frame. Thinner boards require closer spacing between supports. Interlocking timber or plastic tiles with a backing grid are available from around 1.5 cm.

Patio tiles made from PU-bound rubber granules are available in thicknesses of around 2–4 cm, depending on the range. They are loose laid and usually joined by an integrated interlocking system to form a continuous surface.

Which type of patio surface heats up least in the sun?

Which patio surface heats up least in the sun depends more on sun exposure and surface colour than on the material itself. A shaded patio remains coolest; trees, awnings or a shade sail keep direct sunlight off the surface, while air movement supports surface cooling.

In direct sun, light-coloured surfaces heat up less than dark ones. Light surfaces reflect a greater proportion of solar radiation, whereas dark surfaces absorb more radiation and convert it into heat. This applies to wood, WPC, stone, ceramic and rubber granules.

Alongside surface temperature, the material affects how hot a patio surface feels underfoot. Dense stone, ceramic or concrete surfaces transfer stored heat to the sole of the foot quickly. Patio tiles made from PU-bound rubber granules have a porous grain structure and low density, transferring less heat to the skin during brief contact and cooling down quickly once direct sunlight has ended.

Which terrace covering is low-maintenance?

Ceramic patio slabs with dense surfaces and water-permeable patio slabs made from rubber granules bound with polyurethane are both easy to maintain. How often they need cleaning depends on their surface texture, the joints, the patio’s location and how well it drains.

Dirt tends to sit on the surface of ceramic patio slabs and can usually be swept or washed away. Rough or heavily textured surfaces and wide joints, however, trap dirt more readily and need more upkeep. This is particularly true of exposed aggregate slabs, but also applies to natural stone, terracotta and timber deck tiles.

Patio slabs made from rubber granules work differently: rainwater carries fine dust and pollen through their water-permeable structure. Leaves, soil and sand can be removed with a broom or garden hose. A pressure washer can be used for a more thorough clean, with the water draining through the slabs.

Being easy to maintain does not make patio slabs maintenance-free. Dirt and vegetation need to be cleared regularly from drainage outlets, edges and open joints.

How much do WARCO rubber patio tiles cost per square metre?

WARCO rubber patio tiles start at around €36 (about £31) per square metre. At that price, the tiles are 3 cm thick and measure 50 × 50 cm, so four tiles cover one square metre. All prices include VAT.

The cost of patio slabs varies by product range, thickness and surface. Slabs with a coloured EPDM surface are among the more expensive options, at up to around €110 (about £94) per square metre. You can find the price of each option on its product page in the online shop.

The price per square metre is for the tiles alone. On a firm base such as concrete, asphalt, concrete block paving or natural stone paving slabs, the tiles can be laid loose without mortar or adhesive (dry-laid), making installation a DIY job. If there is no firm base, you also need to allow for the cost of a sub-base, such as one built from gravel grids.

When do patio tiles need an edge restraint?

Patio tiles made from rubber granules require an edge restraint where lateral movement is possible. Where the tiles are firmly connected to each other, an edge restraint may be omitted. The same applies where the tiles are permanently bonded to the substrate.

Existing lateral boundaries can replace an additional edge restraint. If a wall, balustrade, parapet or kerb adjoins the edge tiles directly, no further restraint is needed. No further restraint is needed where a lawn meets the edge tiles flush and at the same level.

Turf rooted in the ground provides lateral support for the tiles and prevents them from shifting. Bonded tiles generally do not require an edge restraint. Designs with a fixed puzzle interlock generally do not require an edge restraint.

What sub-base is needed under patio slabs?

The formation beneath patio slabs must be level, have adequate load-bearing capacity and be well drained. For ground-level patios, the substrate must be built to withstand frost. The precise construction depends on the type of patio slab and the existing site conditions.

For a ground-level patio, the sub-base comprises a formation with adequate load-bearing capacity and adequately compacted frost-protection and load-bearing layers. Rigid concrete or natural stone slabs are normally laid on an evenly screeded laying course of chippings. Depending on the system, ceramic patio slabs may be installed on a laying course of chippings, on adjustable pedestals or in a bonded system. Timber and WPC decking require a suitable substructure.

Patio tiles made from PU-bound rubber granules require continuous support and cannot be supported at individual points on adjustable pedestals. On sound concrete, asphalt, concrete block paving or natural stone, PU-bound rubber granule tiles can be loose-laid without a mortar bed. The existing substrate must allow water to drain at an adequate fall towards an outlet or infiltration area.

On an unpaved substrate, first create a level formation with adequate load-bearing capacity. A gravel grid laid across the full area can provide stable, water-permeable support on this formation. Fill the gravel grid cells completely with suitable chippings. Depending on substrate conditions and frost exposure, a compacted frost-protection and load-bearing layer beneath the gravel grid may also be required. A concrete slab is not required for a gravel-grid construction.

How are gravel stabilisation grids installed to form a sub-base?

Gravel stabilisation grids can be installed as a sub-base in three ways: directly on in-situ ground, on a grit laying course over the formation, or on a crushed-stone sub-base.

The grid cells are filled with crushed, angular grit. The cells are filled to the top, and the grit is levelled flush with their upper edges.

Where the ground has sufficient bearing capacity and is only lightly loaded, installation directly on in-situ ground is sufficient. Topsoil must first be removed, and the formation must be carefully prepared. The grids are laid directly on the natural ground, allowing the 4 cm ground spikes to penetrate the soil.

A thin grit layer can be laid over the formation to even out irregularities. The ground spikes extend through this grit layer and into the formation.

Where the ground has a low bearing capacity, protection from frost effects is required, or high loads are expected, a crushed-stone sub-base must first be installed and compacted. The ground spikes cannot penetrate the compacted crushed stone. A grit layer is therefore laid over the sub-base so that the spikes are fully embedded. This grit layer must be at least 6 cm thick, and the grids must sit firmly on it.

Gravel grids are also sold as grass grids or plastic cellular grids. The grids are set into the thin grit layer, which is about 2 to 5 cm thick when used to even out irregularities.

How do plastic connectors join safety tiles and rubber tiles?

Plastic connectors, also known as connector pins or plastic connecting pins, are cylindrical plastic pins with a profiled surface. They fit into factory drilled holes along the sides of the tiles and connect rubber tiles in adjacent rows. Perpendicular to the connector axis, they prevent the tiles from shifting relative to one another. Along the connector axis, the tiles remain free to move.

The tiles are laid row by row in half bond. The plastic connectors are first inserted into the holes along one side of the tile being positioned. With the connectors leading, this tile is then pressed into the holes in the two adjoining tiles in the row already laid. The connectors are designed to fit tightly, so noticeable force during insertion and when pressing the tiles together is normal. If required, the connectors may be glued in place, which prevents the tiles from drifting apart along the connector axis.

Complementary products and recommended accessories

Plastic connector pin
ZS

Plastic connector pin

Matt black

Joins rubber tiles in a half-bond pattern and aligns kerbs – plastic pin for the side holes

/ Piece

View product
ALLESDICHT – Liquid Rubber Waterproofing ALLESDICHT – Liquid Rubber Waterproofing
AD

ALLESDICHT – Liquid Rubber Waterproofing

Black Grey

11 or 25 kg – liquid waterproofing by brush, trowel or spray – for balcony, terrace, flat roof, basement – tested as structural waterproofing, solvent-free

€118.90 / Piece €36.03 / m² x 2 mm

View product