PU Adhesive OP "Grey"

The WARCO PU Adhesive is the perfect complement for installing rubber granulate floors and accessories. With strong adhesion and a permanently elastic bond, it secures tiles, skirting boards and edging elements either to the substrate or to each other, providing a durable and reliable installation.

Reliable bonding for WARCO installations

Supplied in 310 ml cartridges and applied with a standard sealant gun, the adhesive allows precise, economical bead placement – perfect for tile edges, skirting boards, palisades or kerb elements. Once cured, the joint remains elastic and absorbs movement, vibration and stress, ensuring a stable and secure surface.

Resilient and durable

The bond created by PU Adhesive withstands high mechanical loads while remaining flexible. This prevents cracking or joint failure, even if the substrate shifts or temperature changes occur.

Indoor and outdoor application

The adhesive can be applied indoors and outdoors within a temperature range of +5 °C to +35 °C. The cured joint is weather-resistant and impact-resistant, ensuring long-lasting performance both indoors and out.

Low-emission and certified

PU Adhesive is very low in emissions (EMICODE® EC 1 Plus), carries VOC class A+ and complies with fire behaviour requirements according to EN 13501, Class E. It therefore meets high standards of safety and environmental compatibility.

Application guidance

Bonding surfaces must be clean, dry, dust- and grease-free and load-bearing. Porous substrates should be cleaned mechanically before application. Curing time depends on bead thickness, temperature and humidity. Once fully cured, the adhesive is odourless and provides a long-lasting, dependable bond.

The PU Adhesive is the smart and professional choice for the secure installation of WARCO products.