Shop

ALLESDICHT – Liquid Rubber Waterproofing AD "Black"

€35.10 / Piece
  • plus shipping costs

    /
  • Ready to ship

    by arrangement – production yet to start
  • €39.00 / 1.11 Piece / m² x 2 mm
  • (3.00 kg /  Piece)

EAN: 4251469300354 | Item no.: 0035

ALLESDICHT is a ready-to-use, rubber-based liquid-applied waterproofing for balconies, terraces, flat roofs and basements. The material is applied straight from the bucket and dries to form a seamless, elastic rubber membrane. This waterproof coating keeps out water and bridges fine cracks in the substrate.

Where can ALLESDICHT be used?

ALLESDICHT waterproofs horizontal and vertical surfaces indoors and outdoors. Typical uses include waterproofing balconies and terraces, leaking flat roofs and garage roofs, gutters, and basement walls and floor slabs in contact with the ground. Because it is applied as a liquid, ALLESDICHT also waterproofs junctions, transitions between surfaces and pipe penetrations without seams.

What surfaces does the liquid waterproofing adhere to?

ALLESDICHT adheres to almost all sound substrates, including concrete, bitumen, brick, wood, metal, fibre cement, tiles and firmly bonded old coatings. The waterproofing remains firmly bonded to the substrate even if moisture comes through from behind. The dried rubber membrane can stretch by around 200% and bridges cracks up to 0.5 mm.

Is ALLESDICHT an alternative to resin-based membranes?

ALLESDICHT is as easy to apply as a resin-based liquid waterproofing membrane, but it is a water-thinnable dispersion containing finely ground rubber from used tyres. The waterproofing is solvent-free and ready to use. No mixing is needed. ALLESDICHT has a honey-like consistency and can be applied with a paintbrush, roofing brush, smoothing trowel or airless sprayer. Tools can be cleaned with water. Apply at 5 to 30 °C in dry weather.

How much ALLESDICHT is needed per m²?

The amount of ALLESDICHT needed depends on the layer thickness. For a dry layer of 1 mm, apply around 1.6 kg per m². The minimum thickness of 2 mm requires around 3.3 kg per m². For structural waterproofing in accordance with the test certificate, the dry layer must be at least 3 mm thick. Apply it in at least three coats. This requires around 4.8 kg per m². Where the building element is exposed to more water, the layer must be 4 mm thick and requires around 6.4 kg per m². Each wet coat must be no more than 1.5 mm thick and must dry before the next coat is applied.

How has ALLESDICHT been tested?

ALLESDICHT has been tested in Germany as structural waterproofing and has a German general building authority test certificate. The waterproofing is impermeable to water, weather-resistant and, when applied correctly, also withstands water under pressure. Its fire behaviour is class B2 under DIN 4102-1. ALLESDICHT can be left exposed as the finished coating. Rubber paving slabs for balconies and terraces can also be laid on the dried waterproofing.

Product type AD (liquid rubber membrane | crack-bridging | water-based, solvent-free, bitumen-free)
Price and discount
0 m² x 2 mm

Product Highlights

Characteristics

UV-stabilised

ELT granules are UV-stabilised. Some coating shades may change slightly outdoors.

Indoor and outdoor use

Frost-resistant, suitable for indoor and outdoor use.

Efl

Normally flammable.

Product Details – Material and Structure

Comparative values