Rubber granulate palisade RP "Anthracite"

€46.30

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€231.50 / 5 piece / lm
(12.72 kg / piece)

EAN: 4251469325548 | Item no.: 2554

The round palisade is a versatilely utilisable, highly-functional design element for supporting embankments, bounding the car parks, paths and driveways, binding the patches and separate the areas. The shock-resistant palisade provides passive safety in terms of fall injury prevention and shock absorption. Bumping it by car does not leave any scratches or scars; in case of an overthrow, the risk of head injuries is reduced.

Thanks to the longitudinally formed cove and galvanised ground anchor, the palisades can be mounted in a straight line or freely meandering in a concrete fundament. This way they stay interdependently without an open gap, so that percolation is possible.

The palisades of different heights and colours can be naturally combined with each other.

The product data sheet to print

Rubber granulate palisade von WARCO im Farbdesign Anthracite mit den Abmessungen ø 250 x 400 mm. Produktfoto von Artikel 2554 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 2554, Rubber granulate palisade, Format ø 250 x 400 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 2554 - Rubber granulate palisade im Farbdesign Anthracite. Abmessungen ø 250 x 400 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 2554 - Rubber granulate palisade im Format ø 250 x 400 mm.

Typische Verlegung oder Einbausituation für den Artikel 2554 von WARCO - Rubber granulate palisade, Farbton Anthracite in der Abmessung ø 250 x 400 mm.

Anthracite (active)
Brick red + €3.40
Chocolate brown + €6.00
Grass green + €6.00
Slate grey + €6.00

Product type RP (Palisade ø 25 cm | steel tube as ground anchor | row fit through hollow groove | edges with bevelling | to be set in concrete)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - soil

Weatherproof; full or partial covering with soil is permissible.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The mix of rubber granulate (irregularly formed rubber grains) and buffing dust (fibrous rubber particles) is ideal to manufacture particularly dimensionally stable and abrasion-proof products with fine-structured surface. The material is obtained from car tyres and contains mainly a high-valuable mix of natural rubber (NR) and Styrene-Butadiene Rubber, short SBR. The material properties of the WARCO preform largely correspond to those known from SBR.

Assembly or connection system

There is a galvanised steel pipe centrally ingrained as a concrete anchor into every palisade. A 50 mm deep cove runs over the total length of the palisade. The adjacent palisade can be inserted into this cove with an exact fitting - this brings additional stability to the palisade row and makes it possible to create freely curved lines.

Compressive point-load strength

4 / 5

The higher the indicated value, the harder the material and the lower the penetration of an object that puts a point-load on the material. Typical point-loads are high-heel shoes, table or chair legs, plant tubs on wheels, some kinds of pedestals for devices and appliances.

In individual cases, it can be tested on-site on a material sample if the chosen material has a compression strength sufficient for the desired application.

Rubber granulate palisade RP "Anthracite"

The advantages of WARCO

Characteristics

Product properties

Comparative values