Fall protection tile FS "Pale brown"

€25.60

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€102.40 / 4 piece / m²
(5.05 kg / piece)

EAN: 4251469305380 | Item no.: 0538

You take no risks if you choose the reliable fall protection tile for the playground, underneath the playing equipment and in front of a climbing wall. The fall protection tile is tested according to EN 1177 and it permanently protects from fall injuries up to the critical fall height. It's free of maintenance.

Obviously, the fall protection tile is extensively water-permeable, weatherproof, frost-resistant and slide-blocking. It can be used both indoors and outdoors. In case of an unbound base course, the tiles should be laid on reasonably priced plastic honeycomb grid in order to secure the long-term stability of the fall protecting surface. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Fall protection tile von WARCO im Farbdesign Pale brown mit den Abmessungen 500 x 500 x 30 mm. Produktfoto von Artikel 0538 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0538, Fall protection tile, Format 500 x 500 x 30 mm, Farbe Pale brown.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0538 - Fall protection tile im Format 500 x 500 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 0538 von WARCO - Fall protection tile, Farbton Pale brown in der Abmessung 500 x 500 x 30 mm.

Pale brown (active)
Anthracite - €18.10
Brick red - €17.50
Chocolate brown - €16.90
Grass green - €16.90

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

100 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 100 cm fall height. Safety for public and private playing areas.

Colourfast and UV resistant

Material and colour are resistant against UV radiation during weathering in a long-term perspective.

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Low-flammable (cfl-s1)

Building material class Cfl-s1 (EN 13501-1), B1 (DIN 4102-1) low-flammable, low production of smoke.

Colour
Pale brown

In the products in the colour design Pale brown, a thick layer of a monochromely imbued (unicolour) EPDM granulate in the colour Pale brown (like RAL 8025) builds the wear surface. The high-value elastomer EPDM (Ethylene Propylene Diene Monomer) is lightfast, colourfast and weatherproof. The products in the colour design Pale brown are suitable for upmarket applications, where the permanent colour intensity and homogeneity is important.

Material

The coloured rubber granulate of the wear layer is a newly manufactured, fully colourful EPDM (Ethylene Propylene Diene Monomer) with max. edge length of 4 mm. The bottom layer of the two-layered, but monolithically (from one piece) manufactured tile is made of a black tyre rubber granulate - Styrene Butadiene Rubber, SBR. This complex structure is especially favourable for the physical properties and durability of the element.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 15 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound (in particular cases also on unbound) base course or on a plastic honeycomb grid. Please take note of the laying instruction.