Fall protection tile FS "Chocolate brown"

€8.70

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€54.38 / 6.25 piece / m²
(3.20 kg / piece)

EAN: 4251469305243 | Item no.: 0524

You take no risks if you choose the reliable fall protection tile for the playground, underneath the playing equipment and in front of a climbing wall. The fall protection tile is tested according to EN 1177 and it permanently protects from fall injuries up to the critical fall height. It's free of maintenance.

Obviously, the fall protection tile is extensively water-permeable, weatherproof, frost-resistant and slide-blocking. It can be used both indoors and outdoors. In case of an unbound base course, the tiles should be laid on reasonably priced plastic honeycomb grid in order to secure the long-term stability of the fall protecting surface. The relationship of resistance against mechanical loading and abrasion to damping, elasticity and open-pore nature is optimally adapted for the use of the tiles on normally loaded surfaces.

The product data sheet to print

Fall protection tile von WARCO im Farbdesign Chocolate brown mit den Abmessungen 400 x 400 x 30 mm. Produktfoto von Artikel 0524 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 0524, Fall protection tile, Format 400 x 400 x 30 mm, Farbe Chocolate brown.

Großaufnahme vom Verbindungssystem von WARCO-Boden 0524 - Fall protection tile im Farbdesign Chocolate brown. Abmessungen 400 x 400 x 30 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 0524 - Fall protection tile im Format 400 x 400 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 0524 von WARCO - Fall protection tile, Farbton Chocolate brown in der Abmessung 400 x 400 x 30 mm.

Chocolate brown (active)
Anthracite - €1.20
Brick red - €0.60
Slate grey
Grass green

Product type FS (lateral connectors | edges with bevelling | pronounced drainage profile on the bottom)

Compare

Discount:

Calculation of quantity

0 m²

0 piece

The product data sheet to print

The advantages of WARCO

90 cm critical fall height (EN 1177:2018)

TÜV technical release certificate (2018) for 90 cm fall height. Safety for public and private playing areas.

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

Weatherproof - indoors and outdoors

Recommended for areas in buildings and in the open air. Assure the drainage on or in the base course.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Chocolate brown

For chocolate brown products, the rubber granulate (SBR) gained from the utilisation of car tyres is mixed with the chocolate brown dyed binder and then formed in a kind of waffle iron. Thus, every single black rubber granule is coated all round in chocolate brown. The colour imitates dark wood and has a wide range of applications.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The tiles are laid edge to edge in the 50% offset. This means, the plates in one row are displaced a half-length of the tile towards the adjacent rows. Four plastic connectors included to each tile join the adjacent rows together. Every plate is connected to 2 tiles from the previous and 2 tiles from the next row. However, this connection is not stable and doesn't prevent the plates from drifting apart, so that the surface has to be bordered.

Structure of the underside

The bottom side of the tile is strongly structured on the entire surface. There are symmetrically arranged "frustums" with a height of about 15 mm looking from the bottom side of the wear layer. They are functional elements leading to the optimisation of the damping and drainage. The tiles can be laid on a bound (in particular cases also on unbound) base course or on a plastic honeycomb grid. Please take note of the laying instruction.