Edge end tile Pro (2 pieces) TZ "Anthracite"

€17.70

7-14 days

Plus delivery costs
/
Realisation time approx.
7-14 days
€75.32 / m²
(2 piece / Set 3.06 kg / piece)

EAN: 4251469349155 | Item no.: 4915

In order to ensure that the edge end tiles fit perfectly with the whole tiles of the same delivery, they are cut from the tiles of the same order. Therefore, exchange is not possible. The set contains 2 pieces!

The edge end tile is a full tile cut in half with a straight outer edge. Laying edge end tiles saves time and money if the size of the tile surface is determined by the size of the tiles. There is no cutting on site and the tile surface is framed by half tiles. The edge end tile is used in combination with the corner end tile. This product has been manufactured with an enhanced concentration. Thus, it's more resistant against abrasion and mechanical loading, but it's less elastic and open-pored and the damping is worse. It's recommended for surface with normal and enhanced loading.

The product data sheet to print

Edge end tile Pro (2 pieces) von WARCO im Farbdesign Anthracite mit den Abmessungen 500 x 235 x 30 mm. Produktfoto von Artikel 4915 in der Aufsicht von schräg vorne.

Detailaufnahme der Randausprägung von WARCO-Produkt 4915, Edge end tile Pro (2 pieces), Format 500 x 235 x 30 mm, Farbe Anthracite.

Großaufnahme vom Verbindungssystem von WARCO-Boden 4915 - Edge end tile Pro (2 pieces) im Farbdesign Anthracite. Abmessungen 500 x 235 x 30 mm.

Aufsicht auf die Unterseite, also die Bodenseite von WARCO-Formteil 4915 - Edge end tile Pro (2 pieces) im Format 500 x 235 x 30 mm.

Typische Verlegung oder Einbausituation für den Artikel 4915 von WARCO - Edge end tile Pro (2 pieces), Farbton Anthracite in der Abmessung 500 x 235 x 30 mm.

Anthracite (active)
Brick red + €1.40
Chocolate brown + €1.40
Slate grey + €3.00
Grass green + €3.00

Compare

Discount:

Calculation of quantity

0 m²

0 Set

The product data sheet to print

The advantages of WARCO

Limitedly UV resistant

The ageing and lifetime of the product depend on the intensity of the UV radiation (sunlight).

Hygienically harmless for humans and animals

No prohibited pollutant emissions. Virtually odourless (initial odour evaporates).

For weatherproof areas, also outdoors

For weatherproof areas, but also outdoors. Avoid waterlogging and permanent drenching.

Normally inflammable (efl)

Building material class Efl (EN 13501-1), B2 (DIN 4102-1). Authority denomination: normally inflammable.

Colour
Anthracite

A car tyre is made of black dyed rubber (SBR). That's why the rubber granulate made of car tyres is also black. During processing with a colourless binder, black products are made. Similarly to the car tyres, the colour changes in these products after a short time from full black to a dark grey, also known as anthracite.

Material

The rubber granulate with irregularly formed particles is obtained from discarded tyres. It mainly consists in the high-valuable mix of natural rubber (NR) and synthetically manufactured Styrene-Butadiene Rubber (SBR). The material properties of the WARCO preform largely correspond to those known from SBR. The granulate with an edge length from 1.0 to 3.0 mm creates fine-grained surfaces.

Assembly or connection system

The edges of every tile are formed as a zip toothed strip (dovetail joint). Due to the interlocking of the plates during the laying and the form-fit connection arising this way, a permanently connected, positionally stable tile carpet. That's why the plates (normally) aren't connected with (pasted to) the base course. The connection of the rubber granulate tiles as a zip is particularly stable, durable and safe.

Structure of the underside

A drainage system consisting in 4 mm deep drainage channels across the elements and about 15 mm deep hemispherical domes is formed into the bottom side of the tiles. The tiles can be laid on almost every workable base course, also unbound. Please take note of the laying instruction.